708-467-7181     16425 Van Dam Rd., South Holland, IL 60473

 

  Proper battery maintenance during the hot summer months is just as important as it is during the frigid winter months. Your truck battery powers your business. Follow this checklist to extend the life of your battery:

Preventative Maintenance
During scheduled preventative maintenance (PM), check and confirm the following:

    Battery connections are clean and free of debris
    Battery connections are tight
    Hold-downs are properly secured
    Battery pack is fully charged

Battery Inspection
Inspect the truck battery pack as part of your regularly scheduled vehicle inspection, any time the operator is experiencing ‘hard starts’ or the truck is being used for shorter runs with hotel loads. When the battery pack is tested, look for the following factors:

    State of charge of the battery pack
    Full charge is 12.6 volts for flooded batteries and 12.8 volts for AGM batteries
    Hold-downs and battery connections are securely fastened
    Batteries are fully recharged and tested with either a load or conductance tester
    Evaluate what loads are being used and how much power is being taken by the additional use of air conditioning during warmer months

If the battery pack is 2-3 years old, the user may want to consider replacing batteries to reduce the risk of a no-start situation or emergency repairs.

Conductance Testing in our Truck Repair Shop.
Conductance uses the battery’s response to a very small signal in attempt to predict the effects of a much larger current. Conductance testing is ineffective on a discharged battery. If the battery is known to be discharged, or if the tester tells the operator to charge before testing again, the battery must be completely recharged.

State-of-Charge
State-of-charge is estimated from the open circuit voltage (OCV) and is used to determine if the battery is in a testable state or to estimate how long charging will take. Worth noting:

    Battery design varies
    Typical values are shown on the charging time tables
    A true 75 percent or better charge state is needed for most testing
   

 

 

    New semi trucks aren't always the best option. You can get so much more out of buying a used semi truck. If you are a driver who wants his or her own truck, you really should consider both the obvious and not-so-obvious benefits of buying a used semi truck.

Save a Lot of Money

Used anything usually means big savings when you are ready to buy. You can save tens of thousands of dollars off the new price for a used semi truck. This factor becomes even more important if you want to buy a doubly-large semi cab with double the sleeper space. The bigger the vehicle, the bigger the price, but when you buy used, you can buy much more truck for the price.

Know What Is Wrong with the Truck Before You Buy It

We have to put the trucks through a major inspection before they can list the trucks for sale. Just as a car dealership has to find everything wrong with a vehicle before selling it, so we do. We will ensure you know exactly what to expect if you buy one of their vehicles. There is an official sale inspection sheet on every truck that shows what has passed inspection and what is not currently working on the truck. They cannot sell anything that has some majorly dangerous dysfunctions, which helps you feel safer about what you buy. Stop by at our used semi truck dealership to see the entire used semi truck collection.

 

Wind and ice present unique challenges for drivers. Being highly aware of weather conditions can prevent unexpected circumstances and get you to your destination safely.

As part of the Our Roads, Our Safety campaign, the FMCSA has mapped out helpful tips for commercial vehicle drivers, which include:

1. Drive defensively.
Commercial drivers have to be constantly vigilant to stay aware of any unexpected road conditions, distracted drivers and motorists who don’t understand how commercial vehicles operate. Scan ahead about 15 seconds for traffic issues, work zones and other dangers. It’s also encouraged to check mirrors every 8-10 seconds to be aware of vehicles entering your blind spots.

2. Use your turn signals.
Signal and brake to give other drivers plenty of time to notice your intentions. If you need to pull off the road, use flashers, reflective triangles and road flares to alert approaching drivers.

3. Know when to slow down.
When you drive too fast for weather or poor road conditions, it creates risks for spills and rollovers, as well as crashes.

4. Maintain your vehicle.
Make sure that pre-trip safety inspections are completed, especially on your truck’s tires and brakes. Check that your load is well balanced and secure. Loose materials create road hazards.

5. Buckle up.
Safety belts save lives, reduce injuries and allow drivers to stay inside and in control of their vehicles in case of a crash.

6. Get enough rest.
Don’t drive a commercial vehicle when you’re feeling fatigued, too ill to focus or on medications that make you drowsy or dizzy.

7. Stay up to date on weather and road conditions.
Getting the right information helps you plan your trip. Be aware that non-commercial navigation systems and apps may not provide warning of height and weight limitations, as well as other commercial vehicle restrictions.

8. Practice work zone safety.